| Tittle | Cited Form |
Oxidation & coating | Oxidation
behavior of Hf-modified platinum aluminide coatings during thermal
cycling | Pro
Nat Sci-Mater, 2018; 8(1):34-39 |
Damage
evolution and failure mechanism of thermal barrier coatings under Vickers
indentation by using acoustic emission technique | Pro
Nat Sci-Mater, 2018; 8(1):90-96 |
Thermal
conductive behavior of zirconium boride coated by nanoalumina with different
mass proportions in epoxy composites | Pro Nat Sci-Mater, 2018; 8(3): 345-353 |
Bioinspired
and hydrophobic alkyl-silanized protective polymer coating for Mg alloy | Pro Nat Sci-Mater, 2018; 8(3): 354-362 |
Surface
modification of Ti-45Al-8.5 Nb alloys by microarc oxidation to improve
high-temperature oxidation resistance | Pro Nat Sci-Mater, 2018; 8(3): 386-390 |
Corrosion
behavior of ferritic ODS steel prepared by adding YH2 nanoparticles in
supercritical water at 600 °C | Pro Nat Sci-Mater, 2018; 8(4): 505-509 |
Oxidation
behavior of high-strength FeCrAl alloys in a high-temperature supercritical
carbon dioxide environment | Pro Nat Sci-Mater, 2018; 8(6):731-739 |
Experimental
studies and modeling for the transition from internal to external oxidation
of three-phase Nb-Si-Cr alloys | Pro
Nat Sci-Mater, 2018; 8(6):740–748 |
Superalloy | Coupling
effects of tungsten and molybdenum on microstructure and stress-rupture
properties of a nickel-base cast superalloy | Pro
Nat Sci-Mater, 2018; 8(1): 45-53 |
Electrochemical
corrosion behavior of the cobalt modified aluminide coating in 3.5 wt% NaCl
solutions | Pro
Nat Sci-Mater, 2018; 8(1):85-89 |
Insight
of the dendrite deformation in Ni-based superalloys for increased
misorientation along convergent boundaries | Pro Nat Sci-Mater, 2018; 8(4):489-495 |
Anisotropy
of nickel-based superalloy K418 fabricated by selective laser melting | Pro
Nat Sci-Mater, 2018; 8(4):496-504 |
Microstructure-based
hot extrusion process control principles for nickel-base superalloy pipes | Pro
Nat Sci-Mater, 2018; 8(3):391-398 |
Al alloy | Precipitation
behavior and grain refinement of burnishing Al-Zn-Mg alloy | Pro
Nat Sci-Mater, 2018; 8(1): 54-59 |
Combined
effect of pre-aging and Ag/Cu addition on the natural aging and bake
hardening in Al-Mg-Si alloys | Pro Nat Sci-Mater, 2018; 8(3):363-370 |
Macro-micro
dynamic behaviors and fracture modes of roll bonded 7A52/7A01/7B52 aluminum
laminates in high velocity deformation | Pro
Nat Sci-Mater, 2018; 8(4):510-519 |
Evolutions
of diffusion activation energy and Zener–Hollomon parameter of ultra-high
strength Al-Zn-Mg-Cu-Zr alloy during hot compression | Pro
Nat Sci-Mater, 2018; 8(5): 635-646 |
Ni alloy | Martensite
transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg
shape memory alloys | Pro
Nat Sci-Mater, 2018; 8(1): 60-65 |
Mg alloy | Effect
of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium
Alloy | Pro
Nat Sci-Mater, 2018; 8(1):66-73 |
Effects
of Gd solutes on hardness and yield strength of Mg alloys | Pro Nat Sci-Mater, 2018; 8(6):724–730 |
Mo alloy | Microstructure
and improved mechanical properties of ultrafine-grained Mo-12Si-8.5B (at.%)
alloys with addition of ZrB2 | Pro Nat Sci-Mater, 2018; 8(3): 371-377 |
Gass metals | A
FeNiMnC alloy with strain glass transition | Pro
Nat Sci-Mater, 2018; 8(1):74-77 |
Influence
of minor boron on the microstructures of a second generation Ni based single
crystal superalloy | Pro Nat Sci-Mater, 2018; 8(3):483-488 |
Strain
glass transition in high damping Mn-22Cu-5Ni-2Fe alloy | Pro
Nat Sci-Mater, 2018; 8(5):614-617 |
The
hidden disintegration of cluster heterogeneity in Fe-based glass-forming
alloy melt | Pro Nat Sci-Mater, 2018; 8(6):696–703 |
Mechanical,
deformation and fracture behaviors of bulk metallic glass composites
reinforced by spherical B2 particles | Pro Nat Sci-Mater, 2018; 8(6):704–710 |
Ceramics | Microstructure
and mechanical properties of the SiC/Zr4 joints brazed with TiZrNiCu filler
for nuclear application | Pro Nat Sci-Mater, 2018; 8(3):378-385 |
Steels | Microstructure
of ultrahigh carbon martensite | Pro Nat Sci-Mater, 2018; 8(6):749–753 |
Other alloys | Deformation
and damage behaviors of as-cast TiAl-Nb alloy during creep | Pro
Nat Sci-Mater, 2018; 8(5):618-625 |
Microstructural
evolution and mechanical properties of Nb-Si-Cr ternary alloys with a
tri-phase Nb/Nb5Si3/Cr2Nb microstructure fabricated by spark plasma sintering | Pro
Nat Sci-Mater, 2018; 8(5):626-634 |
Enviroment Materials | Triboelectric
nanogenerator as a new technology for effective PM2.5 removing with zero
ozone emission | Pro
Nat Sci-Mater, 2018; 8(2):99-112 |
SnO2-montmorillonite
composite for removal and inhibition Microcystis aeruginosa assisted by
UV-light | Pro
Nat Sci-Mater, 2018; 8(3):281-287 |
ZrO2-supported
α-MnO2: Improving low-temperature activity and stability for catalytic
oxidation of methane | Pro
Nat Sci-Mater, 2018; 8(3):296-300 |
Clean
water generation with switchable dispersion of multifunctional Fe3O4-reduced
graphene oxide particles | Pro
Nat Sci-Mater, 2018; 8(4):422-429 |
Performance
improvement of hybrid polymer membranes for wastewater treatment by
introduction of micro reaction locations | Pro
Nat Sci-Mater, 2018; 8(2): 148-159 |
Effects
of -NO2 and -NH2 functional groups in mixed-linker Zr-based MOFs on gas
adsorption of CO2 and CH4 | Pro
Nat Sci-Mater, 2018; 8(2): 160-167 |
Hydrogen storage | Hydrogen
storage performances of the as-milled REMg11Ni (RE = Sm, Y) alloys catalyzed
by CeO2 | Pro Nat Sci-Mater, 2018; 8(3):259-265 |
Microstructure
characterization and hydrogen storage properties study of Mg2Ni0.92M0.08 (M =
Ti, V, Fe or Si) alloys | Pro
Nat Sci-Mater, 2018; 8(4):464-469 |
Study
on the hydrogen storage property of (TiZr0.1)xCr1.7-yFeyMn0.3 (1.05 < x
< 1.2, 0.2 < y < 0.6) alloys | Pro
Nat Sci-Mater, 2018; 8(4): 470-477 |
Effects
of the hierarchical pyrolysis polyaniline on reversible hydrogen storage of
LiBH4 | Pro Nat Sci-Mater, 2018; 8(4): 529-533 |
Improved
dehydriding property of polyvinylpyrrolidone coated Mg-Ni hydrogen storage
nano-composite prepared by hydriding combustion synthesis and wet mechanical
milling | Pro
Nat Sci-Mater, 2018; 8(1): 7-14 |
Noble-metal-free
MoS2/Ta3N5 heterostructure photocatalyst for hydrogen generation | Pro
Nat Sci-Mater, 2018; 8(2):189-193 |
Dehydrogenation
and reaction pathway of Perovskite-Type NH4Ca(BH4)3 | Pro
Nat Sci-Mater, 2018; 8(2):194-199 |
Battery | Fuel
cell development for New Energy Vehicles (NEVs) and clean air in China | Pro
Nat Sci-Mater, 2018; 8(2):113-120 |
Enhanced
electrochemical stability of carbon-coated antimony nanoparticles with sodium
alginate binder for sodium-ion batteries | Pro
Nat Sci-Mater, 2018; 8(2):205-211 |
Temperature
effect and thermal impact in lithium-ion batteries: A review | Pro
Nat Sci-Mater, 2018; 8(6): 653-666 |
Anode materials | Embedding
Co3O4 nanoparticles into graphene nanoscrolls as anode for lithium ion
batteries with superior capacity and outstanding cycling stability | Pro
Nat Sci-Mater, 2018; 8(2):212-217 |
Morphological
evolution and kinetic enhancement of Li2FexMn1-xSiO4/C cathodes for Li-ion
battery | Pro
Nat Sci-Mater, 2018; 8(5): 535-541 |
Zr4+/F–
co-doped TiO2(anatase) as high performance anode material for lithium-ion
battery | Pro
Nat Sci-Mater, 2018; 8(5): 542-547 |
Facile
ball-milled synthesis of SnS2-carbon nanocomposites with superior lithium
storage | Pro
Nat Sci-Mater, 2018; 8(6): 676-682 |
Energy | Nanomaterials
for Clean Air, Energy and Water | Pro
Nat Sci-Mater, 2018; 8(2):97-98 |
Development
of multi-functional nano-paint for energy harvesting applications | Pro
Nat Sci-Mater, 2018; 8(1):1-6 |
Solar cells | Blue
TiO2 polymorph: An efficient material for dye-sensitized solar cells
fabricated using a low-temperature sintering process | Pro
Nat Sci-Mater, 2018; 8(5): 548-553 |
Reducing
Zn diffusion in single axial junction InP nanowire solar cells for improved
performance | Pro Nat Sci-Mater, 2018; 8(2): 178-182 |
Supercapacitor | MXene-2D
layered electrode materials for energy storage | Pro Nat Sci-Mater, 2018; 8(2):133-147 |
Thermoelectric | Enhancing
thermoelectric performance of Cu-modified Bi0.5Sb1.5Te3 by electroless
plating and annealing | Pro Nat Sci-Mater, 2018; 8(2): 218-224 |
Synergistically
optimizing electrical and thermal transport properties of n-type PbSe | Pro Nat Sci-Mater, 2018; 8(3): 275-280 |
Functional materials | Development
of lead-free multifunctional materials Bi(Co0.45Ti0.45Fe0.10)O3 | Pro Nat Sci-Mater, 2018; 8(3):308-314 |
Novel
multiferroicity in orthorhombic SmCrO3 | Pro Nat Sci-Mater, 2018; 8(5): 609-613 |
Enhanced
flame-retardant performance of poly (lactic acid) (PLA) composite by using
intrinsically phosphorus-containing PLA | Pro Nat Sci-Mater, 2018; 8(5): 590-597 |
Dielectric
properties, electrical modulus and current transport mechanisms of
Au/ZnO/n-Si structures | Pro Nat Sci-Mater, 2018; 8(3): 325-331 |
Luminescence | Synthesis
and luminescence properties of Mn4+-dopant Ca14Zn6Ga10-xAlxO35 solid solution | Pro Nat Sci-Mater, 2018; 8(3): 301-307 |
Flexible
photodetector based on large-area few-layer MoS2 | Pro Nat Sci-Mater, 2018; 8(5): 563-568 |
Magnetic materials | Tailoring
impedance match and enhancing microwave absorption of Fe3O4/Bi24Fe2O39/Bi
hollow porous microrods by controlling their composition | Pro Nat Sci-Mater, 2018; 8(5): 575-583 |
Electrocatalysis | A
novel non-enzymatic hydrogen peroxide sensor based on Co:ZnO modified
electrodes | Pro
Nat Sci-Mater, 2018; 8(1): 24-27 |
Functionalization
of graphene materials by heteroatom-doping for energy conversion and storage | Pro
Nat Sci-Mater, 2018; 8(2): 121-132 |
Photocatalysis | Role
of support in photothermal carbon dioxide hydrogenation catalysed by
Ni/CexTiyO2 | Pro
Nat Sci-Mater, 2018; 8(2):168-177 |
Efficient
inactivation of Staphylococcus aureus by silver and copper loaded
photocatalytic titanate nanotubes | Pro
Nat Sci-Mater, 2018; 8(1): 15-23 |
Synthesis
of ZnWO4-x nanorods with oxygen vacancy for efficient photocatalytic
degradation of tetracycline | Pro Nat Sci-Mater, 2018; 8(4): 408-415 |
Improving
the photocatalytic activity of graphitic carbon nitride by thermal treatment
in a high-pressure hydrogen atmosphere | Pro
Nat Sci-Mater, 2018; 8(2): 183-188 |
Synthesis
of AgI/Bi2MoO6 nano-heterostructure with enhanced visible-light
photocatalytic property | Pro
Nat Sci-Mater, 2018; 8(2): 235-241 |
Carboxyl-modified
hierarchical wrinkled mesoporous silica supported TiO2 nanocomposite
particles with excellent photocatalytic performances | Pro Nat Sci-Mater, 2018; 8(5): 683-688 |
Influence
of operational parameters on the photocatalytic performance of DE-NOx process
Via MIL-101(Fe) | Pro Nat Sci-Mater, 2018; 8(6): 689-695 |
Other catalysis | Effect
of B sites on the catalytic activities for perovskite oxides
La.6Sr.4CoxFe1-xO3-δ as metal-air batteries catalysts | Pro Nat Sci-Mater,
2018; 8(4):399-407 |
Spontaneous
Ga whisker formation on FeGa3 | Pro Nat Sci-Mater, 2018; 8(5):569-574 |
| Hydrothermal
synthesis of pyrrhotite (Fex-1S) nanoplates and their antibacterial,
cytotoxic activity study | Pro Nat Sci-Mater, 2018; 8(4): 447-455 |
Calcium
carbonate nanoparticles promote osteogenesis compared to adipogenesis in
human bone-marrow mesenchymal stem cells | Pro Nat Sci-Mater, 2018; 8(5): 598-608 |
Modelling | An
equivalent 1D nanochannel model to describe ion transport in multilayered
graphene membranes | Pro
Nat Sci-Mater, 2018; 8(2): 246-250 |
Experimental
investigation and thermodynamic assessment of the yttrium hydrogen binary
system | Pro Nat Sci-Mater, 2018; 8(3): 332-336 |
Numerical
simulation for the investment casting process of a large-size titanium alloy
thin-wall casing | Pro
Nat Sci-Mater, 2018; 8(4): 520-528 |
Multi-scale
simulation of single crystal hollow turbine blade manufactured by liquid
metal cooling process | Pro
Nat Sci-Mater, 2018; 8(1): 78-84 |
BP
neural network based flexural strength prediction of open-porous Cu-Sn-Ti
composites | Pro Nat Sci-Mater, 2018; 8(3): 315-324 |
Synthesis | Preparation
and characterization of doubly substituted microwave absorbing material by
sol-gel technique for super high frequency applications | Pro
Nat Sci-Mater, 2018; 8(4): 478-482 |
High
efficiency synthesis of HKUST-1 under mild conditions with high BET surface
area and CO2 uptake capacity | Pro Nat Sci-Mater, 2018; 8(5): 584-589 |
Specific
structural features of LnZrOx (Ln: La, Sm) mixed oxides prepared by different
methods | Pro
Nat Sci-Mater, 2018; 8(4): 437-446 |
Thermal
atomic layer etching: Mechanism, materials and prospects | Pro Nat Sci-Mater, 2018; 8(6): 667-675 |
Characterisation | Spin
dynamics characteristics of nitrogen vacancy spins in diamond films using
enhanced Raman shift with spin microscopy | Pro Nat Sci-Mater, 2018; 8(5): 647-652 |
Nanoindentation | Nanoindentation
response analysis of TiN-Cu coating deposited by magnetron sputtering | Pro
Nat Sci-Mater, 2018; 8(1): 40-44 |
Mechanical
characterization and strain-rate sensitivity measurement of Ti-7333 alloy
based on nanoindentation and crystal plasticity modeling | Pro Nat Sci-Mater, 2018; 8(6): 718-723 |
Rolling | Effect
of cold rolling process on microstructure and mechanical properties of high
strength β titanium alloy thin sheets | Pro Nat Sci-Mater, 2018; 8(6): 711-717 |
Carbon nanotube | Optimizing
the fabrication of carbon nanotube electrode for effective capacitive
deionization via electrophoretic deposition strategy | Pro Nat Sci-Mater, 2018; 8(2): 251-257 |
Enhanced
microwave absorption properties of rod-shaped Fe2O3/Fe3O4/MWCNTs composites | Pro Nat Sci-Mater, 2018; 8(3): 288-295 |
Nano particles | Transition-metal-doped
Fe2O3 nanoparticles for oxygen evolution reaction | Pro Nat Sci-Mater, 2018; 8(4): 430-436 |
Ga-In
liquid metal nanoparticles prepared by physical vapor deposition | Pro Nat Sci-Mater, 2018; 8(1): 28-33 |
Laser
synthesized nanoparticle alloys of metals with bulk miscibility gaps | Pro Nat Sci-Mater, 2018; 8(4): 465-463 |
Nano fluild | Silicone
oil-based solar-thermal fluids dispersed with PDMS-modified Fe3O4@graphene
hybrid nanoparticles | Pro Nat Sci-Mater, 2018; 8(4):554-562 |
Flow
and heat transfer behaviour of nanofluids in microchannels | Pro Nat Sci-Mater, 2018; 8(2): 225-234 |
Nanosheets | Nano-mechanical
and tribological properties of copper matrix composites reinforced by
graphene nanosheets | Pro Nat Sci-Mater, 2018; 8(4):416-421 |
Nanoengineering
of amino - functionalized mesoporous silica nanospheres as nanoreactors | Pro
Nat Sci-Mater, 2018; 8(2): 242-245 |
WO3
nanoflakes decorated with CuO clusters for enhanced photoelectrochemical
water splitting | Pro Nat Sci-Mater, 2018; 8(2): 200-204 |
Amorphous Materials | Investigation
of functional, physical, mechanical and thermal properties of TiO2 embedded
polyester hybrid composites: A design of experiment (DoE) study | Pro Nat Sci-Mater, 2018; 8(3): 266-274 |
Preparation
of Si-doped and cross linked carbon nanofibers via electrospinning and their
supercapacitive properties | Pro Nat Sci-Mater, 2018; 8(3): 337-344 |